# Equivocal zones

#### 2020-06-05

library(probably)

## Equivocal zones

In some fields, class probability predictions must meet certain standards before a firm decision can be made using them. If they fail these standards, the prediction can be marked as equivocal, which just means that you are unsure of the true result. You might want to further investigate these equivocal values, or rerun whatever process generated them before proceeding.

For example, in a binary model, if a prediction returned probability values of 52% Yes and 48% No, are you really sure that that isn’t just random noise? In this case, you could use a buffer surrounding a threshold of 50% to determine whether or not your model is sure of its predictions, and mark values you are unsure about as equivocal.

Another example could come from a Bayesian perspective, where each prediction comes with a probability distribution. Your model might predict 80% Yes, but could have a standard deviation around that of +/- 20%. In this case, you could set a maximum allowed standard deviation as the cutoff of whether or not to mark values as equivocal.

To work with these equivocal zones, probably provides a new class for hard class predictions that is very similar to a factor, but allows you to mark certain values as equivocal.

x <- factor(c("Yes", "No", "Yes", "Yes"))

# Create a class_pred object from a factor
class_pred(x)
#> [1] Yes No  Yes Yes
#> Levels: No Yes
#> Reportable: 100%

# Say you aren't sure about that 2nd "Yes" value.
# You could mark it as equivocal.
class_pred(x, which = 3)
#> [1] Yes  No   [EQ] Yes
#> Levels: No Yes
#> Reportable: 75%

The reportable rate is the fraction of values that are not equivocal, relative to the total number. Above, you can see that the reportable rate started at 100%, but as soon as a single value was marked equivocal, that value dropped to 75%. In fields where equivocal zones are used, there is often a tradeoff between marking values as equivocal and keeping a certain minimum reportable rate.

Generally, you won’t create these class_pred objects directly, but will instead create them indirectly through converting class probabilities into class predictions with make_class_pred() and make_two_class_pred().

library(dplyr)
data("segment_logistic")
segment_logistic
#> # A tibble: 1,010 x 3
#>    .pred_poor .pred_good Class
#>  *      <dbl>      <dbl> <fct>
#>  1    0.986      0.0142  poor
#>  2    0.897      0.103   poor
#>  3    0.118      0.882   good
#>  4    0.102      0.898   good
#>  5    0.991      0.00914 poor
#>  6    0.633      0.367   good
#>  7    0.770      0.230   good
#>  8    0.00842    0.992   good
#>  9    0.995      0.00458 poor
#> 10    0.765      0.235   poor
#> # … with 1,000 more rows

# Convert probabilities into predictions
# > 0.5 = good
# < 0.5 = poor
segment_logistic_thresh <- segment_logistic %>%
mutate(
.pred = make_two_class_pred(
estimate = .pred_good,
levels = levels(Class),
threshold = 0.5
)
)

segment_logistic_thresh
#> # A tibble: 1,010 x 4
#>    .pred_poor .pred_good Class      .pred
#>         <dbl>      <dbl> <fct> <clss_prd>
#>  1    0.986      0.0142  poor        poor
#>  2    0.897      0.103   poor        poor
#>  3    0.118      0.882   good        good
#>  4    0.102      0.898   good        good
#>  5    0.991      0.00914 poor        poor
#>  6    0.633      0.367   good        poor
#>  7    0.770      0.230   good        poor
#>  8    0.00842    0.992   good        good
#>  9    0.995      0.00458 poor        poor
#> 10    0.765      0.235   poor        poor
#> # … with 1,000 more rows

If a buffer is used, an equivocal zone is created around the threshold of threshold +/- buffer and any values inside the zone are automatically marked as equivocal.

# Convert probabilities into predictions
#        x > 0.55 = good
#        x < 0.45 = poor
# 0.45 < x < 0.55 = equivocal
segment_pred <- segment_logistic %>%
mutate(
.pred = make_two_class_pred(
estimate = .pred_good,
levels = levels(Class),
threshold = 0.5,
buffer = 0.05
)
)

segment_pred %>%
count(.pred)
#> # A tibble: 3 x 2
#>        .pred     n
#>   <clss_prd> <int>
#> 1       [EQ]    45
#> 2       good   340
#> 3       poor   625

segment_pred %>%
summarise(reportable = reportable_rate(.pred))
#> # A tibble: 1 x 1
#>   reportable
#>        <dbl>
#> 1      0.955

Equivocal values in class_pred objects are converted to NA when the object is converted to a factor. It’s also worth noting that the [EQ] label is not treated as a separate level.

segment_pred %>%
mutate(.pred_fct = as.factor(.pred)) %>%
count(.pred, .pred_fct)
#> # A tibble: 3 x 3
#>        .pred .pred_fct     n
#>   <clss_prd> <fct>     <int>
#> 1       [EQ] <NA>         45
#> 2       good good        340
#> 3       poor poor        625

levels(segment_pred\$.pred)
#> [1] "good" "poor"

This NA behavior feeds into how probably can be used with yardstick. Generally, equivocal values are removed completely from performance evaluation. So converting them to NA and then leaving the default na_rm = TRUE in any yardstick metric removes them from consideration.

library(yardstick)
#> For binary classification, the first factor level is assumed to be the event.
#> Set the global option yardstick.event_first to FALSE to change this.

# No equivocal zone
segment_logistic_thresh %>%
mutate(.pred_fct = as.factor(.pred)) %>%
precision(Class, .pred_fct)
#> # A tibble: 1 x 3
#>   .metric   .estimator .estimate
#>   <chr>     <chr>          <dbl>
#> 1 precision binary         0.680

# Equivocal zone
segment_pred %>%
mutate(.pred_fct = as.factor(.pred)) %>%
precision(Class, .pred_fct)
#> # A tibble: 1 x 3
#>   .metric   .estimator .estimate
#>   <chr>     <chr>          <dbl>
#> 1 precision binary         0.694

As seen above, removing equivocal values using a simple threshold generally improves performance because the values your model is most unsure about are removed. But don’t be fooled! You should give those cases extra consideration, and remember that your reportable rate has decreased by removing them. In production, you’ll likely have to do something with those predictions!